SUNSHINE T-007 Motherboard simple middle test stand

Suitable for IP 11 /11 Pro/11 Pro Max mid-level motherboard repair test

 

Function

Motherboard detection/Test malfunction/Startup/Display/Touch

Camera/Flash/Photosensitive/Handset/Speaker

Online/WiFi/Face recognition, etc.
 

Feature

Flip buckle design

Tight fit, no deformation, no harm to the motherboard

Easy to align and durable

Needle plate precision design and accurate registration

Precise hole pitch design to ensure that the hole pitch accurately meets the standard test points

Exquisite manufacturing process, precise alignment, and strict screening manufacturing bring you better and more efficient motherboard testing.

Imported high quality·Pure copper gold-plated probe
Uses 0.2mm pure copper probes for better conductivity and accurate connection between motherboards

Bottom plate through-air design
Measure the important voltage and signal of the baseband, no baseband, no signal, no serial number, easy and fast maintenance

Electroplating, matte and anti-slip technology

Scrub process to increase friction

Non-slip, soft and comfortable feeling
 

Usage

Place the lower motherboard first, pay attention to the three positioning posts on the test frame corresponding to the three screw holes of the lower motherboard;

Place the test pin board above the lower board. Note that the positioning holes of the test pin board are facing down, the positioning pins of the test pin board are facing up, and the three positioning holes of the upper pin board are corresponding to the positioning pins on the lower board;

Then place the upper motherboard on top of the test pin board. Note that the three positioning posts on the pin board correspond to the three screw holes on the board;
 
Finally, buckle the test platform, install the SS-905N boot cable, connect the screen, and connect to a regulated power supply or battery to start the test;

To test other functions, just connect the cable to the motherboard's corresponding interface with other accessories (recommended to extend the cable).

Package

Test stand X 1;
Heat module X 2;